innovation-header-cutaway

INNOVATION &

TECHNOLOGY

The Evinrude E-TEC engine  innovation is just the beginning. The Evinrude E-TEC G2 engines were the first Clean-Sheet engines invented by Evinrude engineers.

THE E-TEC G2

In addition, to all the features of the Evinrude E-TEC direct injection technology, the new Evinrude E-TEC G2 is the first Evinrude outboard completely designed and built, start-to-finish, by BRP.

STARBOARD-STARBOARD DESIGN

The Starboard-Starboard is a new exhaust architecture on Evinrude E-TEC G2 engines 200 H.O. and above. By having the exhaust ports on both banks, the rotating crankshaft naturally pushes the pistons to the starboard side. This avoids where the pistons exert their greatest pressure on the cylinder wall. This revolutionary design makes the engine even more reliable and more durable.

PUREPOWER COMBUSTION

We created the most efficient piston/cylinder design in the industry for optimal engine combustion. The combustion chamber of the Evinrude E-TEC G2 was designed with input from the University of Wisconsin - Madison to maximize the fluid dynamics taking place before and after combustion for more mid-range torque, better scavenging, improved fuel economy, and lower emissions.

magneto

MAGNETO POWER

The Beltless Magneto Alternator powers your outboard, you boat and electronics onboard, with up to 40% more power to spare at idle*. Typical alternators are driven by belts that wear and can break. By putting the magneto at the end of the vertical crankshaft on the top of the engine, Evinrude harnesses the tremendous power of the engine to turn a large armature inside the bigger stator, producing far more Amps than a small alternator can produce.

*versus previous Evinrude E-TEC models

ON-ENGINE OIL TANK

The Evinrude E-TEC G2 engines are the only outboards with an internal oil reservoir.  It has a built-in funnel located on the top of the tank for easy fill. The on-engine design frees space in the boat.

INDUSTRY-FIRST CLEAN RIGGING

The patented Dual-Axis Rigging System routes all engine and steering connections through just one tube, which means fewer exposed parts for less wear and tear. One more nagging issue you won’t have to worry About. And even more space in your boat.

 

MATCH YOUR BOAT

True innovation takes many forms. In this case, hundreds of color combinations to choose from. The Evinrude E-TEC G2 is the world’s first outboard that allows you to choose the colors of the side panels, the top panels, the front panels and the accent stripes. Customize an Evinrude E-TEC G2 to perfectly match your boat. Or get an Evinrude boat package with exclusive boat-specific colors.

boat-match